Automatic Pulse Battery Reconditioner for Lead-Acid Batteries

Batteries often fail as sulfates develop slowly and cover the battery plates, but this issue can be solved by using desulfators. The battery desulfator has the following specifications:

SPECIFICATION: - Working Amp: 40mA max - Peak Amp: 4A max - Peak Voltage: 60-100V - Pulse Frequency: 10,000HZ - Cut off amp: 5mA - Voltage: 12V, 24V, 36V, 48V combined, automatic setting - Size information: 17CM x 9CM x 3CM

Q&A:

1. Do I need to make some preparations before desulfating?

2. Check the battery voltage. The voltage should be more than 11.5V, or the desulfator cannot enter into the working cycle.

3. How to use this battery desulfator?

4. Connect the desulfator to your battery (leave it with battery charged or not), then it displays the battery voltage and automatically selects 12 volts.

5. What is the button used for?

6. When the desulfator shows Cxx, you may select the voltage type by yourself with it.

7. When the desulfator works, you may press the button to stop.

8. What are the targeted battery types and situations?

9. Storage battery, winter maintenance
10. 3 years old battery or younger

11. 12V battery bank

12. Can it be used in lithium batteries?

13. No. It only can be used in lead acid batteries. Also, it will not work for damaged or dead batteries.

14. How can I feel the improvement?

15. You can record the discharging time of your battery before and after you desulfate the battery.

Working Cycle: 1. After you finish the battery charging process, connect the battery to the battery desulfator. 2. Firstly, the battery desulfator will show the battery voltage. 3. Then it automatically selects 12 volts. C12 means 12V battery bank, C24 means 24V battery bank, C36 means 36V battery bank, C48 means 48V battery bank. 4. Red light will flash in cycle when it desulfates the battery.

Restore and extended battery life: - Usually, batteries that have been used for more than six months need to be repaired to extend their lifespan. - An advanced battery repair mode uses slow pulse reconditioner technology to detect battery sulfation and acid stratification to restore lost battery performance for stronger engine starts and extended battery life.

New advanced technology: - High-frequency peak pulse delivers an electronically controlled pulse to the battery, dissolves sulphates without damaging battery plates.

Desulfating process: - The process can take up to 3 weeks. It needs to be left on the battery for more than 15 days to have the effect of repairing the battery. - Not every battery can be saved, especially the almost dead battery.

Widely used: - Intelligent automatic repair power without damaging the battery. - Lead acid AGM/GEL/EFB, MF, Flooded battery, VRLA, SLA, wet battery. - For cars, trucks, motorcycles, SUVs, golf carts, farm vehicles, motorboats.

Note: - This battery desulfator is for sulfated batteries, not dead ones. - Battery scrapping can not be repaired, won't solve all battery problems, but it does desulfate them. - This product is ineffective for batteries with damaged plates, dried up electrolyte and severe lack of electrolyte. - The battery needs to be able to be charged when using the desulfator device.

product information: